f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 1 of 7 features functional block diagram 46.5 dbm oip3 @ 5.8 ghz 15.5 db gain @ 2 ghz 10.0 db gain @ 6 ghz 30.0 dbm p1db sot-89 package device voltage (vcc) current (icc) power dissipation (pdc) rf input power (rfin) junction temperature thermal resistance storage temperature (tstg) operating temperature esd (hbm) moisture sensitivity level (msl) +9.0 v 450 ma 4.5w +24 dbm 175 oc 30 oc/w -55 oc to +150 oc -40 oc to +85 oc class 1a msl 1 absolute maximum ratings operation of this device beyond any of these parameters may cause permanent damage. parameter condition min typ max units frequency range (f) dc 6000 mhz test frequency 13.5 1900 mhz small signal gain (s21) externally matched pout/tone=13 dbm, spacing=5 mhz 15.5 db output intercept point (oip3) +44.0 +29.0 +46.5 dbm output p1db +30.0 dbm quiescent current (icq) 300.0 ma gate voltage -1.2 -0.85 -0.5 330.0 v noise figure (nf) 4.5 db unless otherwise specified, the following specifications are guaranteed at room temperature in a mimix test fixture. electrical characteristics (t=25oc, vd=8v) frequency (f) 1900 5800 mhz gain (s21) 15.5 10.1 db ourput ip3 (oip3) 46.5 46.5 dbm output p1db 30.0 30.0 dbm quiescent current (idq) 300 300 ma input return loss (s11) -12.5 -22.5 db output return loss (s22) -7.5 -7.5 db noise figure (nf) 4.5 5.0 db p1db at 5900 mhz can be improved to over 30 dbm at the expense of gain. typical performance: 8v, 25 oc parameter typical units general description the XF1001-SC is a high linearity hetrojunction field effect transistor (hfet) housed in an industry standard sot-89 package. optimum performance is achieved when the device is biased at a drain voltage of 8v and drain current of 300m. at this bias point, the device is capable of more than 30 dbm of p1db and oip3 of more than 46 dbm. the XF1001-SC is suitable for applications up to 6 ghz where it has 10 db of gain.
f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 2 of 7 evaluation board: ev1, 5.8 ghz schematic: ev1, 5.8 ghz vg = -0.85v vd = 8v rfin rfout dielectric: rogers 4003 thickness: 12mil
f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 3 of 7 typical performance: 5.8 ghz XF1001-SC, 8v 300ma 1 0 1 1 1 5 2 0 4 5 6 7 8 9 s (db) 1 5 - 1 0 - 5 0 5 1 0 s 2 1 s 1 1 s 2 2 2 3 4 5 . 5 5 .5 5 5 . 6 5. 6 5 5 . 7 5 .7 5 5 . 8 5.8 5 5 . 9 5 .9 5 6 freq (ghz) - 2 5 - 2 0 - 1 5 XF1001-SC, 8v 300ma 4 2 4 4 4 6 4 8 3 0 3 2 3 4 3 6 3 8 4 0 (dbm) p1d b oip3 p s a t 2 6 2 8 5 . 4 5 5 . 5 5 . 5 5 5. 6 5 . 6 5 5 . 7 5 . 7 5 5. 8 5 . 8 5 5. 9 5 . 9 5 6 6 . 0 5 freq (ghz)
f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 4 of 7 typical performance: 5.8 ghz (over temperature) XF1001-SC, 8v, 300ma: gain vs temperature 1 1 1 2 1 3 5 6 7 8 9 1 0 1 1 5 4 5 5 5 6 5 7 5 8 5 9 6 6 1 gain (db) + 25 oc + 85 oc -40 oc 5 . 4 5 . 5 5 . 6 5 . 7 5 . 8 5 . 9 6 6 . 1 frequency (ghz) XF1001-SC, 8v, 300ma: p1db vs temperature 3 0 3 1 3 2 2 5 2 6 2 7 2 8 2 9 5. 4 5 . 5 5. 6 5 . 7 5 . 8 5 . 9 6 6 . 1 p1db (dbm) +25o c +85o c - 40 o c frequency (ghz) XF1001-SC, 8v, 300ma: oip3 vs temperature 4 4 4 5 4 6 4 7 4 8 3 6 3 7 3 8 3 9 4 0 4 1 4 2 4 3 5. 4 5 . 5 5. 6 5 . 7 5. 8 5 . 9 6 6 . 1 p1db (dbm) + 25 o c + 85 o c -4 0oc frequency (ghz)
f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 5 of 7 typical performance: 1.9 ghz XF1001-SC, 8v 300ma 1 6 1 7 1 5 2 0 s2 1 s1 1 1 1 1 2 1 3 1 4 1 5 s (db) -1 0 - 5 0 5 1 0 s2 2 9 1 0 1 .6 1 .6 5 1 .7 1 .7 5 1 .8 1 .8 5 1 .9 1 .9 5 2 2 .0 5 2 . 1 2 .1 5 2 . 2 freq (ghz) -2 0 -1 5 XF1001-SC, 8v 300ma 4 2 4 4 4 6 4 8 3 2 3 4 3 6 3 8 4 0 4 2 (dbm) p1d b oip 3 2 6 2 8 3 0 1 . 7 1 . 75 1 . 8 1. 8 5 1. 9 1 . 9 5 2 2 . 05 2 . 1 freq (ghz)
f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 6 of 7 physical dimensions pin-out details app note [1] biasing - the XF1001-SC requires power supply sequencing. negative voltage supply (vgg) needs to be turned on first and then positive voltage can be applied to the drain (vdd). when turning off the device, the positive supply (vdd) should be turned off first and then negative voltage (vgg) can be removed. the gate voltage is adjusted in order to set the drain current to the desired level. the gate voltage required to achieve a certain current can vary over temperature and from one device to another due to pinch-off voltage variation. constant drain current can be achieved by implementing an active bias circuit which allows for temperature compensation and eliminates the effect of pinch off voltage variation. d e s crip t io n p in # r f i npu t 1 r f o u t pu t 3 g nd 2 , 4
f1001-sc mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. april 2010 - rev 05-apr-10 dc-6.0 ghz 1.0w packaged hfet page 7 of 7 handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) pb free processes. ordering information part number for ordering description c a u t i o n : e s d s e n s i t i ve appropriate precautions in handling, packaging and testing devices must be observed. proper esd procedures should be followed when handling this device. XF1001-SC-0g00 matte tin plated rohs compliant sot-89 surface mount package in bulk quantity XF1001-SC-0g0t matte tin plated rohs compliant sot-89 surface mount package in tape and reel XF1001-SC-ev1 evaluation board @ 5800 mhz
|
